Economical incremental encoder Ø40 mm. Entry-level solution for basic applications with resolution up to 2,000 PPR.
TS40 Economical Incremental Encoder Ø40 mm
The TS40 is the most accessible solution in the Italsensor range, designed for light automation applications where budget is a determining factor. The PA6 polyamide housing reduces the weight to just 100g. 4 or 6 mm stainless steel shaft, servo-clip flange for quick assembly. Standard resolutions up to 1,000 PPR (2,000 on request).
- Technology — optical
- Interface — Line Driver
- Certifications — CE, RoHS
Technical Specifications
| Resolution | Up to 2,000 PPR |
|---|---|
| Power Supply | +5 V DC ±5 % or +5…24 V DC or +11…30 V DC |
| Outputs | A, B, Z — LD, LD2, PP2, NPN, PNP |
| Shaft Load | axial 40 N; radial 40 N |
| Max Speed | 10,000 rpm (short cycle), 6,000 rpm continuous |
| Protection Rating | IP64 (EN 60529) |
| Operating Temperature | -10 °C … +70 °C |
| Connection | Radial cable gland (cable 1–6 m) |
| Starting Torque | 0.005 Nm |
| Weight | ≈ 0.1 kg |
| Mounting | axial 40 N; radial 40 N |
| Moment of Inertia | 6 g·cm² |
| Bearing Life | 5 × 10⁹ rev (min) |
| Flange Material | aluminium S11 |
| Housing Material | polyamide 6 (PA6) |
| Shaft Material | stainless steel |
| Storage Temperature | -30 °C … +80 °C |
| Protection Rating | IP64 (EN 60529) |
| Humidity | 98 % RH, non-condensing |
| Vibration | 10 g (10 ÷ 2,000 Hz) |
| Shock | 20 g (11 ms) |